Why Wilson-Mohr?

Home | Projects | Why Wilson-Mohr?

Why Wilson-Mohr?
 
For over fourty years companies across the country and around the world have relied on Wilson-Mohr to provide best in class project solutions.  We have proven our expertise and level of committment to customer satisfaction numerous times, and as a result have a very loyal customer base. 
 
The following is a sampling of the automation systems provided by Wilson-Mohr over the past few years.  The applications range form boiler control to offshore data acquisition to safety shutdown systems.  The system platforms vary from DCS to PLC to TMR/FTC to hardwired relays.  In all, Wilson-Mohr, Inc has engineered well over 1000 systems spanning 40 years of service to the refining, petro-chem, food & beverage, power generation, pulp & paper and general manufacturing industries.
 
Take a minute to review our background in project solutions sets, and give us the opportunity to show you why Wilson-Mohr is your premier source for custom industrial project solutions.  Should you have questions, fill our our contact us page, and one of our solution specialists will contact you.
 
PLC/HMI:
 
One Glycol Reboiler
Fuels:
Fuel Gas
Control:
PLC (A-B PLC 5)
Burners:
1
I/O Qty:
116 (Analog / Discrete)
Scope:
Logic, Programming, FSG, LCP
Flame Detection:
Honeywell UV
HMI:
Hard Wired
DCS Interface:
None
 
 
Three Stabilizer Reboilers
Fuels:
Fuel Gas
Control:
PLC (A-B PLC 5)
Burners:
8
I/O Qty:
128 (All Discrete)
Scope:
Logic, Programming, BMS, FSG, LCP’s, Fuel Skid, Start-Up
Flame Detection:
Honeywell UV
HMI:
Hard Wired
DCS Interface:
Modbus
 
 
Two Hot Oil Heaters
Fuels:
Fuel Gas
Control:
PLC (A-B PLC 5/40C)
Burners:
5
I/O Qty:
224 (Analog / Discrete)
Scope:
Logic, Programming, BMS, FSG, LCP’s, Fuel Skid
Flame Detection:
Honeywell UV
HMI:
Hard Wired
DCS Interface:
Controlnet
  
 
One Heat Medium Heater
Fuels:
Fuel Gas
Control:
PLC (A-B SLC 5/04)
Burners:
4
I/O Qty:
140
Scope:
Logic, Programming, BMS, FSG, LCP’s, Fuel Skid
Instrumentation:
Honeywell UV
HMI:
Local Hard Wired
Open Interface:
A-B DH+ To TDC3000
 
 
Two Regeneration Gas Heaters
Fuels:
Fuel Gas
Control:
PLC (A-B SLC 500)
Burners:
2
I/O Qty:
72
Scope:
Logic, Programming, FSG, LCP
Instrumentation:
Honeywell UV
HMI:
Hard Wired
Open Interface:
None
 

Fault Tolerant Controllers:
 
Three Rotary Calciners And One Rotary Dryer
Fuels:
Fuel Gas
Control:
FTC (Honeywell FSC)
Burners:
1
I/O Qty:
128
Scope:
Logic, Programming, BMS, FSG, LCP’s, Start-Up
Instrumentation:
Honeywell UV
HMI:
Hard Wired / DCS Console
Open Interface:
Modbus  To TDC3000
 
 
Two Process Steam Boilers
Fuels:
Refinery Fuel Gas
Control:
FTC (Honeywell FSC)
Burners:
6
I/O Qty:
224
Scope:
Logic, Programming, FSG, LCP’s, Start-Up
Instrumentation:
Iris UV/IR Flicker
HMI:
Honeywell GUS
Open Interface:
None
 
 
One Public Utility Generating Station
Fuels:
Natural Gas / Fuel Oil
Control:
FTC (Honeywell FSC)
Burners:
12
I/O Qty:
500
Scope:
Logic, Programming, Start-up
Instrumentation:
Fireye UV
HMI:
DCS Console
Open Interface:
HW TPS
 
 
Four Process Steam Boilers
Fuels:
Fuel Gas / Fuel Oil / Waste Oil
Control:
FTC (ABB Triguard)
Burners:
2
I/O Qty:
500
Scope:
Logic, FSSP’s, Start-Up
Instrumentation:
Fireye UV
HMI:
Hard Wired / Ind. Computer
Open Interface:
None
 
 
 

DCS/SCADA:
 
 
Pipeline Terminal SCADA System
Fuels:
N/A
Control:
SCADA (Honeywell)
Zones:
N/A
I/O Qty:
400 I/O + 6500 Calculated Points
Scope:
HMI Development, LAN, WAN, Network Planning, Server Construction
Instrumentation:
N/A
HMI:
Eleven (11) HMI Stations
Dual Redundant Servers
Open Interface:
Remote Satellite Stations
 
 
Three FDA Approved Water Processing Trains
Fuels:
N/A
Control:
DCS (OPTO 22)
Zones:
N/A
I/O Qty:
296
Scope:
Logic, Controller Programming, HMI Development, Panel Fabrication
Instrumentation:
None
HMI:
One (1) HMI Stations
Dual Redundant Servers
Open Interface:
Alarm Paging
 

 
Automated Material Handling System
Fuels:
N/A
Control:
DCS (OPTO 22)
Zones:
Five (5) Silos, Four (4) Mixers, Two (2) Dust Collectors
I/O Qty:
264
Scope:
Logic, Controller Programming, HMI Development, Panel Fabrication
Instrumentation:
Load Cells, Level Transmitters, Various Digital Devices
HMI:
One (1) HMI Stations
Open Interface:
None
 
 
Riser Tension Monitoring Systems for Two SPARs
Fuels:
N/A
Control:
DCS (OPTO 22)
Zones:
9 Risers & 6 Risers
I/O Qty:
56
Scope:
Logic, Data Acquisition Programming, HMI Development, LAN, Panel Fabrication
Instrumentation:
Millivolt (mV) Transmitters, Load Cells, Pressure Transmitters
HMI:
Two (2) HMI Stations – One per SPAR
Open Interface:
GE Safety Shutdown System